Prams and Wheel chairs
Prams and wheel chairs both have the Lifestyle tag mounted under the seat so that when being used the tag will be parallel with the ground. If possible try not to mount the tag to a metal pipe but if you must, space it from the frame on some foam similar to the bike mounting.
Just hang the tag from a clip onto your best buddy’s collar or harness and he/or she is good to go.
Care for your Lifestyle Tag
Your Lifestyle Tag is a rugged piece of electronics, but it is not indestructible. It is waterproof and can be washed, it is not affected by rain, dirt or mud, it has no batteries and does not require charging.
Do not bend or fold it and avoid heavy shocks to the tag.
Testing your Lifestyle Tag
Your Lifestyle tag should never need replacing but if you think something is wrong you can test it at any time. Just go to any of the Lifestyle Timing points near you and pass the tag over the area in front of the timing pillar. You will hear a beep from the timing point.
If your bike/pram or wheelchair does not show a tag read check the mounting method again. If the tag is close to metal it will be affected and may not operate. Reposition the tag until a tag read is seen.
Note that the Tag reader is programmed to only register your tag when it first sees it. You will see a single flash of the beacon and hear a loud beep. This will repeat every 5 seconds. If you keep the tag near the reader loops multiple beeps will be heard but not as loud.